Precise, clean, quiet, environmentally friendly. No drive combines all the advantages of a modern production environment more effectively than the servo-electric drive.With our own servo controller Motion Controller, we are also able to supply the complete equipment necessary for the servomotor valve gate.
Using our servo motors with absolute displacement stroke indicators, we are able to position the valve gate in the μm range
By transmission through the toothed belt the highest level of technical cleanliness is ensured.
The drive moves is virtual silence and thus ensures pleasant quiet in the working environment
The significantly improved efficiency compared to hydraulics and pneumatics ensures low energy consumption and protects the environment. In addition, oil disposal and expensive compressors are no longer necessary.
By means of a simple position input on the touch screen of the Motion Controller, the needle position can be changed at any time during operation without having to loosen a screw on the hardware.
The opening and closing speeds of the valve gates can be freely programmed by means of the servo control. This is a decisive advantage especially for technically demanding applications with high surface requirements in the injection area.
Passion for Plastics.
- Sales team
Due to its precision, the servo-electric needle control is a product which is more and more in demand. We have therefore combined the lifting plate with the servo drive. The lifting plate ensures the uniform movement of all the valve gates, and the servo drive in turn ensures the exact and controlled positioning of the lifting plate. Thus, we have maximum precision and can ensure simultaneous needle positioning in the μm range at any time for multiple applications.
Please use the filter options and then click on the nozzle according to your selection in the preview window on the right side.
Reset all filter
Single nozzle available in all tip variants.
Sealent type:
Tip seal / screwed-in melt chamber
Nozzle tip:
Torpedo, EVO-RS tip, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Single application
Note:
Single nozzle available in all tip variants.
Sealent type:
Tip seal / screwed-in melt chamber
Nozzle tip:
Torpedo, EVO-RS tip, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PCTA, PCTG, PETG, PCT, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Single application
Note:
Single nozzle available in all tip variants.
Sealent type:
Tip seal / screwed-in melt chamber
Nozzle tip:
Torpedo, EVO-RS tip, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PCTA, PCTG, PETG, PCT, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140, 160, 180
Application:
Single application
Note:
Single nozzle available in all tip variants.
Sealent type:
Tip seal / screwed-in melt chamber
Nozzle tip:
Torpedo, EVO-RS tip, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PCTA, PCTG, PETG, PCT, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
60, 80, 100, 120, 160, 200, 240
Application:
Single application
Note:
Single nozzle available in all tip variants.
Sealent type:
Tip seal / screwed-in melt chamber
Nozzle tip:
Torpedo, EVO-RS tip, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PCTA, PCTG, PETG, PCT, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
60, 80, 100, 120, 160, 200, 240
Application:
Single application
Note:
For use with manifold systems in cramped installation situations.
Sealent type:
Tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PBT, PC, PC/ABS, PE, POM, PP, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100
Application:
Multiple applications (system application)
Note:
For use with manifold systems in cramped installation situations.
Sealent type:
Tip seal
Nozzle tip:
Torpedo, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, POM, PP, PS, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100
Application:
Multiple applications (system application)
Note:
System nozzle available with all tip variants.
Sealent type:
Valve gate tip seal
Spitzentyp:
Torpedo, EVO-RS tip, through-hole tip, Open tip
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE,POM, PP, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
Attention:
New O-rings should be used each time of disassembly.
System nozzle valve gate
Sealent type:
Valve gate tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE,POM, PP, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
Attention:
New O-rings should be used each time of disassembly.
System nozzle available with all tip variants.
Sealent type:
Tip seal
Nozzle tip:
Torpedo, EVO-RS tip, through-hole tip, Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
System nozzle valve gate
Sealent type:
Valve gate tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PMMA, POM, PP, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
System nozzle available in all tip variants.
Sealent type:
Tip seal
Nozzle tip:
Torpedo, EVO-RS tip, Through-hole tip, Open tip
Suitable materials:
ABS ,ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
System nozzle available in all tip variants.
Sealent type:
Valve gate tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
System nozzle available in all tip variants.
Sealent type:
Tip seal
Nozzle tip:
Torpedo, EVO-RS tip, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140, 160, 180
Application:
Multiple applications (system application)
Note:
System nozzle valve gate
Sealent type:
Valve gate tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140, 160, 180
Application:
Multiple applications (system application)
Note:
System nozzle available in all tip variants.
Sealent type:
Tip seal
Nozzle tip:
Torpedo, EVO-RS tip, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
60, 80, 100, 120, 160, 200, 240, 280, 320
Application:
Multiple applications (system application)
Note:
System nozzle valve gate
Sealent type:
Valve gate tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
60, 80, 100, 120, 160, 200, 240, 280, 320
Application:
Multiple applications (system application)
Note:
System nozzle available in all tip variants.
Sealent type:
Tip seal
Nozzle tip:
Torpedo, EVO-RS tip, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
60, 80, 100, 120, 160, 200, 240, 280, 320
Application:
Multiple applications (system application)
Note:
System nozzle valve gate
Sealent type:
Valve gate tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
60, 80, 100, 120, 160, 200, 240, 280, 320
Application:
Multiple applications (system application)
Note:
System nozzle available in many tip variants.
Sealent type:
Tip seal / cramped installation
Nozzle tip:
Torpedo, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, PA6, PA6.6, PBT, PC, PC/ABS, PE, POM, PP, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120
Application:
Multiple applications (system application)
Note:
System nozzle available in all tip variants.
Sealent type:
Tip seal / cramped installation
Nozzle tip:
Torpedo, EVO-RS tip, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, POM, PP, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
System nozzle valve gate.
Sealent type:
Valve gate tip seal / cramped installation
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, POM, PP, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
Attention:
New O-rings should be used each time of disassembly.
System nozzle available in all tip variants.
Sealent type:
Tip seal / cramped installation
Nozzle tip:
Torpedo, EVO-RS tip, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
Attention:
New O-rings should be used each time of disassembly.
System nozzle valve gate.
Sealent type:
Valve gate tip seal / cramped installation
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PMMA, POM, PP, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
Attention:
New O-rings should be used each time of disassembly.
System nozzle available in all tip variants.
Sealent type:
Tip seal / cramped installation
Nozzle tip:
Torpedo, EVO-RS tip, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
Attention:
New O-rings should be used each time of disassembly.
System nozzle valve gate.
Sealent type:
Valve gate tip seal / cramped installation
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
Attention:
New O-rings should be used each time of disassembly.
System nozzle available in all tip variants.
Sealent type:
Tip seal / cramped installation
Nozzle tip:
Torpedo, EVO-RS tip, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140, 160, 180
Application:
Multiple applications (system application)
Note:
Attention:
New O-rings should be used each time of disassembly.
System nozzle valve gate.
Sealent type:
Valve gate tip seal / cramped installation
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN,SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140, 160, 180
Application:
Multiple applications (system application)
Note:
Attention:
New O-rings should be used each time of disassembly.
System nozzle available in all tip variants.
Sealent type:
Tip seal / cramped installation
Nozzle tip:
Torpedo, EVO-RS tip, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
60, 80, 100, 120, 160, 200, 240, 280, 320
Application:
Multiple applications (system application)
Note:
Attention:
New O-rings should be used each time of disassembly.
System nozzle valve gate.
Sealent type:
Valve gate tip seal / cramped installation
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
60, 80, 100, 120, 160, 200, 240, 280, 320
Application:
Multiple applications (system application)
Note:
Attention:
New O-rings should be used each time of disassembly.
System nozzle available in all tip variants.
Sealent type:
Tip seal / cramped installation
Nozzle tip:
Torpedo, EVO-RS tip, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
60, 80, 100, 120, 160, 200, 240, 280, 320
Application:
Multiple applications (system application)
Note:
Attention:
New O-rings should be used each time of disassembly.
System nozzle valve gate.
Sealent type:
Valve gate tip seal / cramped installation
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
60, 80, 100, 120, 160, 200, 240, 280, 320
Application:
Multiple applications (system application)
Note:
Attention:
New O-rings should be used each time of disassembly.
Can be used as open hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6 GF15, PA6 GF30, PA6 GF50, PA6.6, PA6.6 GF15, PA6.6 GF30, PA4.6, PA 4.6 GF15, PBT, PBT GF15, PBT GF30, PBT GF50, PC, PC/ABS, PE, PET, PMMA, POM, PP, PP GF15, PP GF30, PPO, PPS, PPS + 40%, PPS + 60%, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140, 160, 180, 200, 220
Application:
Multiple applications (system application)
Note:
Can be used as valve gate hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6 GF15, PA6 GF30, PA6.6, PA4.6, PBT, PBT GF15, PBT GF30, PC, PC/ABS, PE, PMMA, POM, PP, PP GF15, PP GF30, PPS, PPS + 40%, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140, 160, 180, 200, 220
Application:
Multiple applications (system application)
Note:
Hot runner nozzle for single application.
Sealent type:
Tip seal
Nozzle tip:
open
Suitable materials:
ABS, ASA, LCP, PA6, PA6 GF15, PA6 GF30, PA6 GF50, PA6.6, PA6.6 GF15, PA6.6 GF30, PA4.6, PA 4.6 GF15, PBT, PBT GF15, PBT GF30, PBT GF50, PC, PC/ABS, PE, PET, PMMA, POM, PP, PP GF15, PP GF30, PPO, PPS, PPS + 40%, PPS + 60%, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
50, 60, 80, 100, 120, 140, 160, 180, 200, 220
Application:
Single application
Note:
Can be used as open hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
Can be used as valve gate hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PMMA, POM, PP, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
Hot runner nozzle for single application.
Sealent type:
Tip seal
Nozzle tip:
open
Suitable materials:
ABS, ASA, LCP, PA6, PA6 GF15, PA6 GF30, PA6 GF50, PA6.6, PA6.6 GF15, PA6.6 GF30, PA4.6, PA 4.6 GF15, PBT, PBT GF15, PBT GF30, PBT GF50, PC, PC/ABS, PE, PET, PMMA, POM, PP, PP GF15, PP GF30, PPO, PPS, PPS + 40%, PPS + 60%, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
50, 60, 80, 100, 120, 140
Application:
Single application
Note:
Can be used as open hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Open tip
Suitable materials:
ABS, ASA, PCTA, PETG, PCT, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
Can be used as valve gate hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
Hot runner nozzle for single application.
Sealent type:
Tip seal
Nozzle tip:
open
Suitable materials:
ABS, ASA, Copolyester, LCP, PA6, PA6 GF15, PA6 GF30, PA6 GF50, PA6.6, PA6.6 GF15, PA6.6 GF30, PA6.6 GF50, PA4.6, PA 4.6 GF15, PA4.6 GF30, PA4.6 GF50, PBT, PBT GF15, PBT GF30, PBT GF50, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PP GF15, PP GF30, PPO, PPS, PPS + 40%, PPS + 60%, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
50, 60, 80, 100, 120, 140
Application:
Single application
Note:
Can be used as open hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Open tip
Suitable materials:
ABS, ASA, PCTA, PETG, PCT, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140, 160, 180
Application:
Multiple applications (system application)
Note:
Can be used as valve gate hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140, 160, 180
Application:
Multiple applications (system application)
Note:
Hot runner nozzle for single application.
Sealent type:
Tip seal
Nozzle tip:
open
Suitable materials:
ABS, ASA, Copolyester, LCP, PA6, PA6 GF15, PA6 GF30, PA6 GF50, PA6.6, PA6.6 GF15, PA6.6 GF30, PA6.6 GF50, PA4.6, PA 4.6 GF15, PA4.6 GF30, PA4.6 GF50, PBT, PBT GF15, PBT GF30, PBT GF50, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PP GF15, PP GF30, PPO, PPS, PPS + 40%, PPS + 60%, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
50, 60, 80, 100, 120, 140, 160, 180
Application:
Single application
Note:
Can be used as open hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Open tip
Suitable materials:
ABS, ASA, PCTA, PETG, PCT, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140, 160, 180
Application:
Multiple applications (system application)
Note:
Can be used as valve gate hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140, 160, 180
Application:
Multiple applications (system application)
Note:
Hot runner nozzle for single application.
Sealent type:
Tip seal
Nozzle tip:
open
Suitable materials:
ABS, ASA, Copolyester, LCP, PA6, PA6 GF15, PA6 GF30, PA6 GF50, PA6.6, PA6.6 GF15, PA6.6 GF30, PA6.6 GF50, PA4.6, PA 4.6 GF15, PA4.6 GF30, PA4.6 GF50, PBT, PBT GF15, PBT GF30, PBT GF50, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PP GF15, PP GF30, PPO, PPS, PPS + 40%, PPS + 60%, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
50, 60, 80, 100, 120, 140, 160, 180
Application:
Single application
Note:
Can be used as open hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Open tip
Suitable materials:
ABS, ASA, PCTA, PETG, PCT, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
60, 80, 100, 120, 140, 160, 180, 200, 240
Application:
Multiple applications (system application)
Note:
Can be used as valve gate hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
60, 80, 100, 120, 140, 160, 180, 200, 240
Application:
Multiple applications (system application)
Note:
Hot runner nozzle for single application.
Sealent type:
Tip seal
Nozzle tip:
open
Suitable materials:
ABS, ASA, Copolyester, LCP, PA6, PA6 GF15, PA6 GF30, PA6 GF50, PA6.6, PA6.6 GF15, PA6.6 GF30, PA6.6 GF50, PA4.6, PA 4.6 GF15, PA4.6 GF30, PA4.6 GF50, PBT, PBT GF15, PBT GF30, PBT GF50, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PP GF15, PP GF30, PPO, PPS, PPS + 40%, PPS + 60%, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
60, 80, 100, 120, 140, 160, 180, 200, 240
Application:
Single application
Note:
Can be used as open hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Open tip
Suitable materials:
ABS, ASA, PA6, PA6 GF15, PA6 GF30, PA6 GF50, PC, PC/ABS, PE, PMMA, PP, PP GF15, PP GF30, PPO, PPSU, PS, SAN, SB
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140, 160, 180, 200, 220
Application:
Multiple applications (system application)
Note:
Can be used as valve gate hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6 GF15, PA6 GF30, PC, PC/ABS, PE, PMMA, PP, PP GF15, PP GF30, PPSU, PS, SAN, SB
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140, 160, 180, 200, 220
Application:
Multiple applications (system application)
Note:
Can be used as open hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Open tip
Suitable materials:
ABS, ASA, PA6, PC, PC/ABS, PE, PMMA, PP, PPO, PPSU, PS, SAN, SB
Nozzle length (mm):
50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
Can be used as valve gate hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PC, PC/ABS, PE, PMMA, PP, PPSU, PS, SAN, SB
Nozzle length (mm):
50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
Can be used as open hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Open tip
Suitable materials:
ABS, ASA, PA6, PC, PC/ABS, PE, PEEK, PMMA, PP, PPO, PPSU, PS, SAN, SB
Nozzle length (mm):
50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
Can be used as valve gate hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PC, PC/ABS, PE, PMMA, PP, PPO, PPSU, PS, SAN, SB
Nozzle length (mm):
50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
Can be used as open hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Open tip
Suitable materials:
ABS, ASA, PCT, PCTA, PCTG, PETG, PA6, PC, PC/ABS, PE, PEEK, PMMA, PP, PPO, PPSU, PS, SAN, SB
Nozzle length (mm):
50, 60, 80, 100, 120, 140, 160, 180
Application:
Multiple applications (system application)
Note:
Can be used as valve gate hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PC, PC/ABS, PE, PMMA, PP, PPO, PPSU, PS, SAN, SB
Nozzle length (mm):
50, 60, 80, 100, 120, 140, 160, 180
Application:
Multiple applications (system application)
Note:
Can be used as open hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Open tip
Suitable materials:
ABS, ASA, PCT, PCTA, PCTG, PETG, PA6, PC, PC/ABS, PE, PEEK, PMMA, PP, PPO, PPSU, PS, SAN, SB
Nozzle length (mm):
50, 60, 80, 100, 120, 140, 160, 180
Application:
Multiple applications (system application)
Note:
Can be used as valve gate hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PC, PC/ABS, PE, PMMA, PP, PPO, PPSU, PS, SAN, SB
Nozzle length (mm):
50, 60, 80, 100, 120, 140, 160, 180
Application:
Multiple applications (system application)
Note:
Can be used as open hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Open tip
Suitable materials:
ABS, ASA, PA6, PC, PC/ABS, PE, PEEK, PMMA, PP, PPO, PPSU, PS, SAN, SB
Nozzle length (mm):
60, 80, 100, 120, 140, 160, 180, 200, 240
Application:
Multiple applications (system application)
Note:
Can be used as valve gate hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PC, PC/ABS, PE, PMMA, PP, PPO, PPSU, PS, SAN, SB
Nozzle length (mm):
60, 80, 100, 120, 140, 160, 180, 200, 240
Application:
Multiple applications (system application)
Note:
