INSTRUCTION MANUAL
Below you will find our instruction manual.
That what is really brilliant, is in actual fact easy.
- Willi Glittenberg, Managing director
Filter
Please use the filter options and then click on the nozzle according to your selection in the preview window on the right side.
Application
Noozle system
Gating
Material
Weight
Reset all filter
- hot halves
- manifold system
- single nozzle
- floating
- screwed
- open
- valve gate nozzle
- ABS
- ASA
- Copolyester
- LCP
- PA4.6
- PA4.6 GF15
- PA4.6 GF30
- PA4.6 GF50
- PA6
- PA6 GF15
- PA6 GF30
- PA6 GF50
- PA6.6
- PA6.6 GF15
- PA6.6 GF30
- PA6.6 GF50
- PBT
- PBT GF15
- PBT GF30
- PBT GF50
- PC
- PC/ABS
- PCT
- PCTA
- PCTG
- PE
- PEEK
- PET
- PETG
- PMMA
- POM
- PP
- PP GF15
- PP GF30
- PPO
- PPS
- PPS +40%
- PPS +60%
- PPSU
- PS
- SAN
- SB
- TPE
- TPU
g
Select
Please enter shot weight per nozzle. max possible shot weight depends on nozzle and material.
DB-16-R
(single application)
Application:
single nozzle
Noozle system:
screwed
Gating:
open
DB-16-R
Single nozzle available in all tip variants.
Sealent type:
Tip seal / screwed-in melt chamber
Nozzle tip:
Torpedo, EVO-RS tip, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Single application
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
DB-20-R
(single application)
Application:
single nozzle
Noozle system:
screwed
Gating:
open
DB-20-R
Single nozzle available in all tip variants.
Sealent type:
Tip seal / screwed-in melt chamber
Nozzle tip:
Torpedo, EVO-RS tip, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PCTA, PCTG, PETG, PCT, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Single application
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
DB-24-R
(single application)
Application:
single nozzle
Noozle system:
screwed
Gating:
open
DB-24-R
Single nozzle available in all tip variants.
Sealent type:
Tip seal / screwed-in melt chamber
Nozzle tip:
Torpedo, EVO-RS tip, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PCTA, PCTG, PETG, PCT, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140, 160, 180
Application:
Single application
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
DB-32-R
(single application)
Application:
single nozzle
Noozle system:
screwed
Gating:
open
DB-32-R
Single nozzle available in all tip variants.
Sealent type:
Tip seal / screwed-in melt chamber
Nozzle tip:
Torpedo, EVO-RS tip, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PCTA, PCTG, PETG, PCT, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
60, 80, 100, 120, 160, 200, 240
Application:
Single application
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
DB-40-R
(single application)
Application:
single nozzle
Noozle system:
screwed
Gating:
open
DB-40-R
Single nozzle available in all tip variants.
Sealent type:
Tip seal / screwed-in melt chamber
Nozzle tip:
Torpedo, EVO-RS tip, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PCTA, PCTG, PETG, PCT, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
60, 80, 100, 120, 160, 200, 240
Application:
Single application
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
DE-10
(System application)
Application:
manifold system
hot halves
Noozle system:
floating
Gating:
valve gate nozzle
DE-10
For use with manifold systems in cramped installation situations.
Sealent type:
Tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PBT, PC, PC/ABS, PE, POM, PP, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- tightest possible cavity
spacing = 11mm
DE-6,7
(System application)
Application:
manifold system
hot halves
Noozle system:
floating
Gating:
open
DOWNLOADS
Einbauhinweise
Vorkammerbuchsen
DE-6,7
For use with manifold systems in cramped installation situations.
Sealent type:
Tip seal
Nozzle tip:
Torpedo, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, POM, PP, PS, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m power cable
- cramped possible cavity
spacing = 8x13 mm
DS-14
(System application)
Application:
manifold system
hot halves
Noozle system:
screwed
Gating:
open
DS-14
System nozzle available with all tip variants.
Sealent type:
Valve gate tip seal
Spitzentyp:
Torpedo, EVO-RS tip, through-hole tip, Open tip
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE,POM, PP, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
Attention:
New O-rings should be used each time of disassembly.
DS-14-N
(System application)
Application:
manifold system
hot halves
Noozle system:
screwed
Gating:
valve gate nozzle
DS-14-N
System nozzle valve gate
Sealent type:
Valve gate tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE,POM, PP, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- special lengths available on request
Attention:
New O-rings should be used each time of disassembly.
DS-16
(System application)
Application:
manifold system
hot halves
Noozle system:
screwed
Gating:
open
DS-16
System nozzle available with all tip variants.
Sealent type:
Tip seal
Nozzle tip:
Torpedo, EVO-RS tip, through-hole tip, Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
DS-16-N
(System application)
Application:
manifold system
hot halves
Noozle system:
screwed
Gating:
valve gate nozzle
DS-16-N
System nozzle valve gate
Sealent type:
Valve gate tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PMMA, POM, PP, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
DS-20
(System application)
Application:
manifold system
hot halves
Noozle system:
screwed
Gating:
open
DS-20
System nozzle available in all tip variants.
Sealent type:
Tip seal
Nozzle tip:
Torpedo, EVO-RS tip, Through-hole tip, Open tip
Suitable materials:
ABS ,ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
DS-20-N
(System application)
Application:
manifold system
hot halves
Noozle system:
screwed
Gating:
valve gate nozzle
DS-20-N
System nozzle available in all tip variants.
Sealent type:
Valve gate tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
DS-24
(System application)
Application:
manifold system
hot halves
Noozle system:
screwed
Gating:
open
DS-24
System nozzle available in all tip variants.
Sealent type:
Tip seal
Nozzle tip:
Torpedo, EVO-RS tip, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140, 160, 180
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
DS-24-N
(System application)
Application:
manifold system
hot halves
Noozle system:
screwed
Gating:
valve gate nozzle
DS-24-N
System nozzle valve gate
Sealent type:
Valve gate tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140, 160, 180
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
DS-32
(System application)
Application:
manifold system
hot halves
Noozle system:
screwed
Gating:
open
DS-32
System nozzle available in all tip variants.
Sealent type:
Tip seal
Nozzle tip:
Torpedo, EVO-RS tip, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
60, 80, 100, 120, 160, 200, 240, 280, 320
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
DS-32-N
(System application)
Application:
manifold system
hot halves
Noozle system:
screwed
Gating:
valve gate nozzle
DS-32-N
System nozzle valve gate
Sealent type:
Valve gate tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
60, 80, 100, 120, 160, 200, 240, 280, 320
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
DS-40
(System application)
Application:
manifold system
hot halves
Noozle system:
screwed
Gating:
open
DS-40
System nozzle available in all tip variants.
Sealent type:
Tip seal
Nozzle tip:
Torpedo, EVO-RS tip, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
60, 80, 100, 120, 160, 200, 240, 280, 320
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
DS-40-N
(System application)
Application:
manifold system
hot halves
Noozle system:
screwed
Gating:
valve gate nozzle
DS-40-N
System nozzle valve gate
Sealent type:
Valve gate tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
60, 80, 100, 120, 160, 200, 240, 280, 320
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
DT-11-B
(System application)
Application:
manifold system
hot halves
Noozle system:
floating
Gating:
open
DT-11-B
System nozzle available in many tip variants.
Sealent type:
Tip seal / cramped installation
Nozzle tip:
Torpedo, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, PA6, PA6.6, PBT, PC, PC/ABS, PE, POM, PP, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
DT-14-B
(System application)
Application:
manifold system
hot halves
Noozle system:
floating
Gating:
open
DT-14-B
System nozzle available in all tip variants.
Sealent type:
Tip seal / cramped installation
Nozzle tip:
Torpedo, EVO-RS tip, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, POM, PP, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
DT-14-NB
(System application)
Application:
manifold system
hot halves
Noozle system:
floating
Gating:
valve gate nozzle
DT-14-NB
System nozzle valve gate.
Sealent type:
Valve gate tip seal / cramped installation
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, POM, PP, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
Attention:
New O-rings should be used each time of disassembly.
DT-16-B
(System application)
Application:
manifold system
hot halves
Noozle system:
floating
Gating:
open
DT-16-B
System nozzle available in all tip variants.
Sealent type:
Tip seal / cramped installation
Nozzle tip:
Torpedo, EVO-RS tip, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
Attention:
New O-rings should be used each time of disassembly.
DT-16-NB
(System application)
Application:
manifold system
hot halves
Noozle system:
floating
Gating:
valve gate nozzle
DT-16-NB
System nozzle valve gate.
Sealent type:
Valve gate tip seal / cramped installation
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PMMA, POM, PP, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
Attention:
New O-rings should be used each time of disassembly.
DT-20-B
(System application)
Application:
manifold system
hot halves
Noozle system:
floating
Gating:
open
DT-20-B
System nozzle available in all tip variants.
Sealent type:
Tip seal / cramped installation
Nozzle tip:
Torpedo, EVO-RS tip, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
Attention:
New O-rings should be used each time of disassembly.
DT-20-NB
(System application)
Application:
manifold system
hot halves
Noozle system:
floating
Gating:
valve gate nozzle
DT-20-NB
System nozzle valve gate.
Sealent type:
Valve gate tip seal / cramped installation
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
Attention:
New O-rings should be used each time of disassembly.
DT-24-B
(System application)
Application:
manifold system
hot halves
Noozle system:
floating
Gating:
open
DT-24-B
System nozzle available in all tip variants.
Sealent type:
Tip seal / cramped installation
Nozzle tip:
Torpedo, EVO-RS tip, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140, 160, 180
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
Attention:
New O-rings should be used each time of disassembly.
DT-24-NB
(System application)
Application:
manifold system
hot halves
Noozle system:
floating
Gating:
valve gate nozzle
DT-24-NB
System nozzle valve gate.
Sealent type:
Valve gate tip seal / cramped installation
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN,SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140, 160, 180
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
Attention:
New O-rings should be used each time of disassembly.
DT-32-B
(System application)
Application:
manifold system
hot halves
Noozle system:
floating
Gating:
open
DT-32-B
System nozzle available in all tip variants.
Sealent type:
Tip seal / cramped installation
Nozzle tip:
Torpedo, EVO-RS tip, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
60, 80, 100, 120, 160, 200, 240, 280, 320
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
Attention:
New O-rings should be used each time of disassembly.
DT-32-NB
(System application)
Application:
manifold system
hot halves
Noozle system:
floating
Gating:
valve gate nozzle
DT-32-NB
System nozzle valve gate.
Sealent type:
Valve gate tip seal / cramped installation
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
60, 80, 100, 120, 160, 200, 240, 280, 320
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- cramped possible cavity spacing = 12mm
Attention:
New O-rings should be used each time of disassembly.
DT-40-B
(System application)
Application:
manifold system
hot halves
Noozle system:
floating
Gating:
open
DT-40-B
System nozzle available in all tip variants.
Sealent type:
Tip seal / cramped installation
Nozzle tip:
Torpedo, EVO-RS tip, Through-hole tip, Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
60, 80, 100, 120, 160, 200, 240, 280, 320
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
Attention:
New O-rings should be used each time of disassembly.
DT-40-NB
(System application)
Application:
manifold system
hot halves
Noozle system:
floating
Gating:
valve gate nozzle
DT-40-NB
System nozzle valve gate.
Sealent type:
Valve gate tip seal / cramped installation
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
60, 80, 100, 120, 160, 200, 240, 280, 320
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
Attention:
New O-rings should be used each time of disassembly.
MONOLITH-11
(System application)
Application:
manifold system
hot halves
Noozle system:
screwed
Gating:
open
MONOLITH-11
Can be used as open hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6 GF15, PA6 GF30, PA6 GF50, PA6.6, PA6.6 GF15, PA6.6 GF30, PA4.6, PA 4.6 GF15, PBT, PBT GF15, PBT GF30, PBT GF50, PC, PC/ABS, PE, PET, PMMA, POM, PP, PP GF15, PP GF30, PPO, PPS, PPS + 40%, PPS + 60%, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140, 160, 180, 200, 220
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
- general installation instructions for nozzle can be found in infocenter
MONOLITH-11-N
(System application)
Application:
manifold system
hot halves
Noozle system:
screwed
Gating:
valve gate nozzle
MONOLITH-11-N
Can be used as valve gate hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6 GF15, PA6 GF30, PA6.6, PA4.6, PBT, PBT GF15, PBT GF30, PC, PC/ABS, PE, PMMA, POM, PP, PP GF15, PP GF30, PPS, PPS + 40%, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140, 160, 180, 200, 220
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
- general installation instructions for nozzle can be found in infocenter
MONOLITH-11-R
(single application)
Application:
single nozzle
Noozle system:
screwed
Gating:
open
MONOLITH-11-R
Hot runner nozzle for single application.
Sealent type:
Tip seal
Nozzle tip:
open
Suitable materials:
ABS, ASA, LCP, PA6, PA6 GF15, PA6 GF30, PA6 GF50, PA6.6, PA6.6 GF15, PA6.6 GF30, PA4.6, PA 4.6 GF15, PBT, PBT GF15, PBT GF30, PBT GF50, PC, PC/ABS, PE, PET, PMMA, POM, PP, PP GF15, PP GF30, PPO, PPS, PPS + 40%, PPS + 60%, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
50, 60, 80, 100, 120, 140, 160, 180, 200, 220
Application:
Single application
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Maximum injection pressure: 2000bar
- Special lengths available on request
- Linear expansion of the nozzle is already considered for ΔT=200°C
- Contact force of the machine nozzle minimum 16kN / maximum 100 kN
- general installation instructions for nozzle can be found in infocenter
MONOLITH-16
(System application)
Application:
manifold system
hot halves
Noozle system:
screwed
Gating:
open
MONOLITH-16
Can be used as open hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Open tip
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
MONOLITH-16-N
(System application)
Application:
manifold system
hot halves
Noozle system:
screwed
Gating:
valve gate nozzle
MONOLITH-16-N
Can be used as valve gate hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PMMA, POM, PP, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
MONOLITH-16-R
(single application)
Application:
single nozzle
Noozle system:
screwed
Gating:
open
MONOLITH-16-R
Hot runner nozzle for single application.
Sealent type:
Tip seal
Nozzle tip:
open
Suitable materials:
ABS, ASA, LCP, PA6, PA6 GF15, PA6 GF30, PA6 GF50, PA6.6, PA6.6 GF15, PA6.6 GF30, PA4.6, PA 4.6 GF15, PBT, PBT GF15, PBT GF30, PBT GF50, PC, PC/ABS, PE, PET, PMMA, POM, PP, PP GF15, PP GF30, PPO, PPS, PPS + 40%, PPS + 60%, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
50, 60, 80, 100, 120, 140
Application:
Single application
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Maximum injection pressure: 2000bar
- Special lengths available on request
- Linear expansion of the nozzle is already considered for ΔT=200°C
- Contact force of the machine nozzle minimum 16kN / maximum 100 kN
- general installation instructions for nozzle can be found in infocenter
MONOLITH-20
(System application)
Application:
manifold system
hot halves
Noozle system:
screwed
Gating:
open
MONOLITH-20
Can be used as open hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Open tip
Suitable materials:
ABS, ASA, PCTA, PETG, PCT, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
MONOLITH-20-N
(System application)
Application:
manifold system
hot halves
Noozle system:
screwed
Gating:
valve gate nozzle
MONOLITH-20-N
Can be used as valve gate hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
MONOLITH-20-R
(single application)
Application:
single nozzle
Noozle system:
screwed
Gating:
open
MONOLITH-20-R
Hot runner nozzle for single application.
Sealent type:
Tip seal
Nozzle tip:
open
Suitable materials:
ABS, ASA, Copolyester, LCP, PA6, PA6 GF15, PA6 GF30, PA6 GF50, PA6.6, PA6.6 GF15, PA6.6 GF30, PA6.6 GF50, PA4.6, PA 4.6 GF15, PA4.6 GF30, PA4.6 GF50, PBT, PBT GF15, PBT GF30, PBT GF50, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PP GF15, PP GF30, PPO, PPS, PPS + 40%, PPS + 60%, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
50, 60, 80, 100, 120, 140
Application:
Single application
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Maximum injection pressure: 2000bar
- Special lengths available on request
- Linear expansion of the nozzle is already considered for ΔT=200°C
- Contact force of the machine nozzle minimum 16kN / maximum 100 kN
- general installation instructions for nozzle can be found in infocenter
MONOLITH-22
(System application)
Application:
manifold system
hot halves
Noozle system:
screwed
Gating:
open
MONOLITH-22
Can be used as open hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Open tip
Suitable materials:
ABS, ASA, PCTA, PETG, PCT, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140, 160, 180
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
MONOLITH-22-N
(System application)
Application:
manifold system
hot halves
Noozle system:
screwed
Gating:
valve gate nozzle
MONOLITH-22-N
Can be used as valve gate hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140, 160, 180
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
MONOLITH-22-R
(single application)
Application:
single nozzle
Noozle system:
screwed
Gating:
open
MONOLITH-22-R
Hot runner nozzle for single application.
Sealent type:
Tip seal
Nozzle tip:
open
Suitable materials:
ABS, ASA, Copolyester, LCP, PA6, PA6 GF15, PA6 GF30, PA6 GF50, PA6.6, PA6.6 GF15, PA6.6 GF30, PA6.6 GF50, PA4.6, PA 4.6 GF15, PA4.6 GF30, PA4.6 GF50, PBT, PBT GF15, PBT GF30, PBT GF50, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PP GF15, PP GF30, PPO, PPS, PPS + 40%, PPS + 60%, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
50, 60, 80, 100, 120, 140, 160, 180
Application:
Single application
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Maximum injection pressure: 2000bar
- Special lengths available on request
- Linear expansion of the nozzle is already considered for ΔT=200°C
- Contact force of the machine nozzle minimum 16kN / maximum 100 kN
- general installation instructions for nozzle can be found in infocenter
MONOLITH-24
(System application)
Application:
manifold system
hot halves
Noozle system:
screwed
Gating:
open
MONOLITH-24
Can be used as open hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Open tip
Suitable materials:
ABS, ASA, PCTA, PETG, PCT, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140, 160, 180
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
MONOLITH-24-N
(System application)
Application:
manifold system
hot halves
Noozle system:
screwed
Gating:
valve gate nozzle
MONOLITH-24-N
Can be used as valve gate hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140, 160, 180
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
MONOLITH-24-R
(single application)
Application:
single nozzle
Noozle system:
screwed
Gating:
open
MONOLITH-24-R
Hot runner nozzle for single application.
Sealent type:
Tip seal
Nozzle tip:
open
Suitable materials:
ABS, ASA, Copolyester, LCP, PA6, PA6 GF15, PA6 GF30, PA6 GF50, PA6.6, PA6.6 GF15, PA6.6 GF30, PA6.6 GF50, PA4.6, PA 4.6 GF15, PA4.6 GF30, PA4.6 GF50, PBT, PBT GF15, PBT GF30, PBT GF50, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PP GF15, PP GF30, PPO, PPS, PPS + 40%, PPS + 60%, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
50, 60, 80, 100, 120, 140, 160, 180
Application:
Single application
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Maximum injection pressure: 2000bar
- Special lengths available on request
- Linear expansion of the nozzle is already considered for ΔT=200°C
- Contact force of the machine nozzle minimum 36kN / maximum 100 kN
- general installation instructions for nozzle can be found in infocenter
MONOLITH-28
(System application)
Application:
manifold system
hot halves
Noozle system:
screwed
Gating:
open
MONOLITH-28
Can be used as open hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Open tip
Suitable materials:
ABS, ASA, PCTA, PETG, PCT, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
60, 80, 100, 120, 140, 160, 180, 200, 240
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
MONOLITH-28-N
(System application)
Application:
manifold system
hot halves
Noozle system:
screwed
Gating:
valve gate nozzle
MONOLITH-28-N
Can be used as valve gate hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, LCP, PA6, PA6.6, PA4.6, PBT, PC, PC/ABS, PE, PET, PMMA, POM, PP, PPO, PPS, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
60, 80, 100, 120, 140, 160, 180, 200, 240
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
MONOLITH-28-R
(single application)
Application:
single nozzle
Noozle system:
screwed
Gating:
open
MONOLITH-28-R
Hot runner nozzle for single application.
Sealent type:
Tip seal
Nozzle tip:
open
Suitable materials:
ABS, ASA, Copolyester, LCP, PA6, PA6 GF15, PA6 GF30, PA6 GF50, PA6.6, PA6.6 GF15, PA6.6 GF30, PA6.6 GF50, PA4.6, PA 4.6 GF15, PA4.6 GF30, PA4.6 GF50, PBT, PBT GF15, PBT GF30, PBT GF50, PC, PC/ABS, PE, PEEK, PET, PMMA, POM, PP, PP GF15, PP GF30, PPO, PPS, PPS + 40%, PPS + 60%, PPSU, PS, SAN, SB, TPE, TPU
Nozzle length (mm):
60, 80, 100, 120, 140, 160, 180, 200, 240
Application:
Single application
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Maximum injection pressure: 2000bar
- Special lengths available on request
- Linear expansion of the nozzle is already considered for ΔT=200°C
- Contact force of the machine nozzle minimum 36kN / maximum 100 kN
- general installation instructions for nozzle can be found in infocenter
MONOLITH-FL-11
(System application)
Application:
manifold system
hot halves
Noozle system:
floating
Gating:
open
MONOLITH-FL-11
Can be used as open hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Open tip
Suitable materials:
ABS, ASA, PA6, PA6 GF15, PA6 GF30, PA6 GF50, PC, PC/ABS, PE, PMMA, PP, PP GF15, PP GF30, PPO, PPSU, PS, SAN, SB
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140, 160, 180, 200, 220
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
- general installation instructions for nozzle can be found in infocenter
MONOLITH-FL-11-N
(System application)
Application:
manifold system
hot halves
Noozle system:
floating
Gating:
valve gate nozzle
MONOLITH-FL-11-N
Can be used as valve gate hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PA6 GF15, PA6 GF30, PC, PC/ABS, PE, PMMA, PP, PP GF15, PP GF30, PPSU, PS, SAN, SB
Nozzle length (mm):
40, 50, 60, 80, 100, 120, 140, 160, 180, 200, 220
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
- general installation instructions for nozzle can be found in infocenter
MONOLITH-FL-16
(System application)
Application:
manifold system
hot halves
Noozle system:
floating
Gating:
open
MONOLITH-FL-16
Can be used as open hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Open tip
Suitable materials:
ABS, ASA, PA6, PC, PC/ABS, PE, PMMA, PP, PPO, PPSU, PS, SAN, SB
Nozzle length (mm):
50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
MONOLITH-FL-16-N
(System application)
Application:
manifold system
hot halves
Noozle system:
floating
Gating:
valve gate nozzle
MONOLITH-FL-16-N
Can be used as valve gate hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PC, PC/ABS, PE, PMMA, PP, PPSU, PS, SAN, SB
Nozzle length (mm):
50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
MONOLITH-FL-20
(System application)
Application:
manifold system
hot halves
Noozle system:
floating
Gating:
open
MONOLITH-FL-20
Can be used as open hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Open tip
Suitable materials:
ABS, ASA, PA6, PC, PC/ABS, PE, PEEK, PMMA, PP, PPO, PPSU, PS, SAN, SB
Nozzle length (mm):
50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
MONOLITH-FL-20-N
(System application)
Application:
manifold system
hot halves
Noozle system:
floating
Gating:
valve gate nozzle
MONOLITH-FL-20-N
Can be used as valve gate hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PC, PC/ABS, PE, PMMA, PP, PPO, PPSU, PS, SAN, SB
Nozzle length (mm):
50, 60, 80, 100, 120, 140
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
MONOLITH-FL-22
(System application)
Application:
manifold system
hot halves
Noozle system:
floating
Gating:
open
MONOLITH-FL-22
Can be used as open hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Open tip
Suitable materials:
ABS, ASA, PCT, PCTA, PCTG, PETG, PA6, PC, PC/ABS, PE, PEEK, PMMA, PP, PPO, PPSU, PS, SAN, SB
Nozzle length (mm):
50, 60, 80, 100, 120, 140, 160, 180
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
MONOLITH-FL-22-N
(System application)
Application:
manifold system
hot halves
Noozle system:
screwed
Gating:
valve gate nozzle
MONOLITH-FL-22-N
Can be used as valve gate hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PC, PC/ABS, PE, PMMA, PP, PPO, PPSU, PS, SAN, SB
Nozzle length (mm):
50, 60, 80, 100, 120, 140, 160, 180
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
MONOLITH-FL-24
(System application)
Application:
manifold system
hot halves
Noozle system:
floating
Gating:
open
MONOLITH-FL-24
Can be used as open hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Open tip
Suitable materials:
ABS, ASA, PCT, PCTA, PCTG, PETG, PA6, PC, PC/ABS, PE, PEEK, PMMA, PP, PPO, PPSU, PS, SAN, SB
Nozzle length (mm):
50, 60, 80, 100, 120, 140, 160, 180
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
MONOLITH-FL-24-N
(System application)
Application:
manifold system
hot halves
Noozle system:
floating
Gating:
valve gate nozzle
MONOLITH-FL-24-N
Can be used as valve gate hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PC, PC/ABS, PE, PMMA, PP, PPO, PPSU, PS, SAN, SB
Nozzle length (mm):
50, 60, 80, 100, 120, 140, 160, 180
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
MONOLITH-FL-28
(System application)
Application:
manifold system
hot halves
Noozle system:
floating
Gating:
open
MONOLITH-FL-28
Can be used as open hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Open tip
Suitable materials:
ABS, ASA, PA6, PC, PC/ABS, PE, PEEK, PMMA, PP, PPO, PPSU, PS, SAN, SB
Nozzle length (mm):
60, 80, 100, 120, 140, 160, 180, 200, 240
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
MONOLITH-FL-28-N
(System application)
Application:
manifold system
hot halves
Noozle system:
floating
Gating:
valve gate nozzle
MONOLITH-FL-28-N
Can be used as valve gate hot runner nozzle in conjunction with Witosa hot runner manifolds.
Sealent type:
Tip seal
Nozzle tip:
Valve gate
Suitable materials:
ABS, ASA, PA6, PC, PC/ABS, PE, PMMA, PP, PPO, PPSU, PS, SAN, SB
Nozzle length (mm):
60, 80, 100, 120, 140, 160, 180, 200, 240
Application:
Multiple applications (system application)
Note:
- incl. 1m power cable
- incl. 1m thermocouple cable
- Special lengths available on request
- DATA-DOWNLOAD
- +49 (0)561 12345